Follow HUMBAUR!

They set the tone.

Joshua Baker, sound technician,
Newcastle

... in sound and lighting technology

After spending the entire day on the band bus, I quickly have to set up the sound systems before the show and start to mix the sound. Sound technicians are always the first to start work and always the last to stop. I have become used to that. It is great fun to mix the perfect sound for cool bands. We are often on the road for weeks on end and I have to take along a lot of equipment. Fortunately I can safely store all this technology in my HUMBAUR wheels-in trailer. Everything is perfectly protected while on the road and always arrives intact. I need to be able to rely on that. One thing is quite sure though: When we start to dismantle everything after the show, my HUMBAUR and I are always the last to leave work.


Joshua Baker, sound technician
Newcastle

Comments

“My goods being protected properly is my top priority. My box trailer offers me that!”

Tracy Campell

“My equipment is heavy. The low loading height got my vote straight away.”

Luke Chambers

“I can only say: hot-galvanised steel. It lasts for ever.”

Matthew White

Tandemkoffer Sandwich Hochlader

This is how you easily load even heavy things into your box trailer: with a loading height of only 610 / 645 mm. This low-level tandem- axle trailer is perfectly finished and protected against corrosion. The sturdy body is made using 45 mm thick sandwich panels consisting of a steel covering on both sides with polyester lacquer coating as well as with a polyurethane-foam core. The edging and rear door are made of aluminium. Parts subject to more wear and tear such as the hinges or the door locks are made of stainless steel. The trailer is waterproof to ensure that your goods are dry when they arrive.

Configure Tandem axle Sandwich, wheels in


Single axle Plywood, wheels out, Plywood roof

The single axis plywood box is a versatile, attractive trailer with a host of sophisticated detailed solutions. The frame and chassis are made of hot-dip galvanised steel and give the plywood box series a long service life. The structure is made of 15 mm multilayer wood with a special plastic coating which, if desired, can be covered with company advertising for an additional charge. A light is fitted inside the trailer to give a better view of the interior. All plywood boxes are equipped with hinges and a lockable espagnolette made of galvanised steel. Plastic seals mounted on the doors ensure waterproof transportation of your goods. The solid powder-coated steel corner reinforcements in the roof area and at the bottom of the front wall give the Humbaur plywood box extreme stability. The floor of the plywood box consists of 15 mm special multi-bonded water-resistant wood with a slip-resistant phenol resin coating. The integrated side tie-down system is fitted to the anodised aluminium frame profiles. Each tie-down ring has a tensile force of 400 kg and is approved by DEKRA. There are 3 tie-down rings mounted on each side. This system can be extended if so desired and gives the carrier sufficient options for securing the cargo. Edge profiles, a warp-resistant rear portal and rain gutters made of anodised aluminium offer maximum protection against corrosion. The single axle plywood box from Humbaur is the ideal partner for transporting your goods.

Configure Single axle Plywood, wheels out, Plywood roof


Single axle Plywood, wheels out, rear ramp

The HKU, a box trailer that is somewhat different and is attractive due to its multifunctional uses. The frame and chassis are made of hot-dip galvanized steel and give the HKU a long service life. The side walls are made of 15 mm multilayer wood with special plastic coating. The designers gave the HKU two support beams per side made of hot-dip galvanized and powder-coated steel. The reason for these additional supports is the wood-aluminium roof which replaces the conventional roof in the case of the HKU. This wood-aluminium cover which is lockable with two locks gives the HKU its special character. Attached to the front wall, this cover can be opened toward the front and thus makes loading easy as child's play. The standard ramp wall instead of a door offers the following equipment: gas spring support for easy operation, three hot-dip galvanized hinges for stability, ramp front edge made of aluminium so it can be more easily passed over, hot-dip galvanized espagnolette for reliable locking of the trailer and an anti-slip strip as an aid against slipping. The integrated lateral tie-down system is mounted the anodized aluminium framework profile. Each tie-down ring has got a traction force of 400 kg and it is approved by DEKRA. Thanks to the ramp wall, you can also bring transport aids into the HKU. The bed of the HKU consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 15 mm thick. The HKU from Humbaur, the multi-talented transport aid you don't want to do without.

Configure Single axle Plywood, wheels out, rear ramp


Tandem axle Plywood, wheels out, rear ramp

The tandem axis plywood box is a versatile, attractive trailer with a host of sophisticated detailed solutions. The frame and chassis are made of hot-dip galvanised steel and give the plywood box series a long service life. The structure is made of 15 mm multilayer wood with a special plastic coating which, if desired, can be covered with company advertising for an additional charge. A light is fitted inside the trailer to give a better view of the interior. All plywood boxes are equipped with hinges and a lockable espagnolette made of galvanised steel. Plastic seals mounted on the doors ensure waterproof transportation of your goods. The solid powder-coated steel reinforcements in the roof area and at the bottom of the front wall give the Humbaur plywood box extreme stability. The floor of the plywood box consists of 15 mm special multi-bonded water-resistant wood with a slip-resistant phenol resin coating. The integrated side tie-down system is fitted to the anodised side frame profiles. Each tie-down ring has a tensile force of 400 kg and is approved by DEKRA. There are 3 tie-down rings mounted on each side. This system can be extended if so desired and gives the carrier sufficient options for securing the cargo. Edge profiles, a warp-resistant rear portal and rain gutters made of anodised aluminium offer maximum protection against corrosion. The tandem axle plywood box from Humbaur, the ideal partner for transporting your goods.

Configure Tandem axle Plywood, wheels out, rear ramp


Tandem axle sandwich PurFerro, wheels out, side walls 18 mm

A traditional trailer with a sturdy, long-lasting sandwich box. 18 mm thick special wood for the floor and 18 mm panels for the walls are evidence of its robust construction. The low loading height and a payload of one to two tonnes (depend- ing on the version) make the HK with its external wheels a particularly flexible solution. Its metal components are either made from rust-proof aluminium or hot-dip galvanised steel. An anti-slip, coated floor and door seals demonstrate the detailed design to ensure that this trailer will provide you with day-to-day support.

Configure Tandem axle sandwich PurFerro, wheels out, side walls 18 mm


Single axle Sandwich, wheels out

The single-axle sandwich box for protected transport of your goods. The frame and chassis are made of hot-dip galvanized steel and give the sandwich box a long service life. The floor of the sandwich box consists of spezial multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. The door hinges, the lockable espagnolette and the door stops are made of stainless steel. Plastic seals that make waterproof transport of your goods possible are mounted on the doors. The single-axle sandwich box from Humbaur is an indispensable aid for protected transport.

Configure Single axle Sandwich, wheels out


Tandem axle Sandwich, wheels out

The tandem sandwich box for protected transport of your goods. The frame and chassis are made of hot-dip galvanized steel and give the sandwich box a long service life. The floor of the sandwich box consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. The door hinges, the lockable espagnolette and the door stops are made of stainless steel. Plastic seals that make waterproof transport of your goods possible are mounted on the doors. The single-axle sandwich box from Humbaur is an indispensable aid for protected transport.

Configure Tandem axle Sandwich, wheels out


All GRP Box Trailer Rexus

A trendy way to take your luggage to its destination: The retro-design of the Rexus resembles a horse transporter. The Rexus also makes use of the tried and trusted Champ chassis. Designer lights with chromium rings, interior lights and pre-installed position and end-outline marker lights as well as a lateral entrance door emphasise its particular appearance. The inside of the tailgate is covered with corrugated aluminium sheeting and supports up to 1 300 kg, which was confirmed by DEKRA. What would you like to transport? Check the list of accessories, because the Rexus can transport a wide range of things.

Configure All GRP Box Trailer Rexus


Single axle Plywood, wheels out, lowerable trailer

The clever box trailer with an intelligent lowering mechanism. The cargo bed moves towards you for loading and unloading. The flat drive-up angle is just 4 to 6 degrees. With the integrated access ramp and upwards opening tailgate, this trailer is the perfect partner for comfortable loading. A solid anti- slip floor and stable side walls with a GRP coating ensure durability. With the optional rocker, it is ideal for transporting motorcycles.

Configure Single axle Plywood, wheels out, lowerable trailer


Single axle

The single-axle Cool Trailer for refrigerated transport of your goods. The frame and chassis are made of hot-dip galvanized steel and give the Cool Trailer a long service life. Four telescoping crank supports with a special hot-dip galvanized bracket are attached directly to the frame as a standard feature with the Cool Trailer and thus provide for stability. The floor of the Cool Trailer is a stately 50 mm thick. It consists of two layers of special multi-bonded wood so as to be waterproof with slip-resistant phenolic resin coating and a thickness of 9 mm; there is a polyurethane rigid foam core in between with a thickness of 32 mm. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the Cool Trailer consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the Cool Trailer are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. Special cold room doors, to be opened separately from one another, with emergency opening from inside and wrap-around door seal provide additional safety. At the rear there is also a solid protective edge made of stainless steel for secure loading. Our HCU 1 unit provides cooling in the single-axle Cool Trailer with the following technical details: control range of cooling temperature +5øC to +15øC, permissible ambient temperature +12øC to +43øC, mains connection 230 V / 50 Hz I/N/PE, refrigerating capacity 1460 watts with a cold room temperature of +5øC and an ambient temperature of +32øC, power consumption 828 watts in cooling mode with an ambient temperature of +32øC, air flow volume of vaporiser 700 mü/h. In addition, the electrically programmed hot gas defrosting of our cooling unit is very user-friendly.

Configure Single axle


Tandem Axle

The tandem-axle Cool Trailer for refrigerated transport of your goods with height-adjustable drawbar. The frame and chassis are made of hot-dip galvanized steel and give the Cool Trailer a long service life. Four telescoping crank supports with a special hot-dip galvanized bracket are attached directly to the frame as a standard feature with the Cool Trailer and thus provide for stability. The floor of the Cool Trailer is a stately 50 mm thick. It consists of two layers of special multi-bonded wood so as to be waterproof with slip-resistant phenolic resin coating and a thickness of 9 mm; there is a polyurethane rigid foam core in between with a thickness of 32 mm. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the Cool Trailer consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the Cool Trailer are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. Special cold room doors, to be opened separately from one another, with emergency opening from inside and wrap-around door seal provide additional safety. At the rear there is also a solid protective edge made of stainless steel for secure loading. Our HCU 1 unit provides cooling in the single-axle Cool Trailer with the following technical details: control range of cooling temperature +5øC to +15øC, permissible ambient.

Configure Tandem Axle


Tandem Axle

The freezer box for refrigerated transport of your goods below 0øC. The frame and the chassis are made of hot-dip galvanized steel and give the freezer box a long service life. The floor of the freezer box is 80 mm thick. It consists of a sandwich structure made of glass fibre reinforced plastic, spezial multi-bonded wood so as to be waterproof and a polyurethane rigid foam core. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the freezer box consists of 80 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. This structure is suitable for transporting food because of a PVC coating on the inside. The mountings of the freezer box are made of anodised aluminium and are constructed so that no cold bridges are present. The warp-resistant rear portal of the freezer box is made of stainless steel. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. The 85 mm-thick insulated rear doors can be opened separately from one another with lockable espagnolettes made of stainless steel. A wrap-around multiple door seal on the rear ensures that the cold remains in the vehicle. Our 150 VBN and 240 OBN units (depending on size) provide cooling in the freezer box with the following technical details: control range of cooling temperature +5øC to -18øC, permissible ambient temperature 0øC to +43øC, mains connection 230 V / 50 Hz I/N/PE, refrigerating capacity 545 or 1300 watts with a cold room temperature of -18øC and an ambient temperature of +32øC, power consumption 1080 or 1740 watts in cooling mode with an ambient temperature of +32øC, air flow volume of vaporiser 1000 or 1400 mü/h. In addition, the electrically programmed hot gas defrosting of our cooling unit is very user-friendly

Configure Tandem Axle


Single axle - basic model

The single-axle Humbaur catering box, the useful aid for your catering activities. The frame and chassis are made of hot-dip galvanized steel and give the HVK a long service life. The quality lighting of the HVK is protected in galvanized and powder-coated brackets. The floor of the HVK consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. In addition, a PVC coating is glued onto the wooden floor. Four cross braces are mounted on the frame that give the HVK stability on all subsurfaces. The wheel houses are integrated into the structure of the HVK. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium. By way of a Stepp made of aluminium chequer plate, you enter the HVK via a lockable entrance door mounted in the front wall. Seals made of special plastic profiles are mounted on the door. The catering flap of the HVK is on the right side. It is easy to open as it has gas spring support. A hinged cover with rain protection strip also ensures that your customers are dry under the catering flap. A very extensive assortment of accessories ensures that you can tailor the HVK to your needs. The HVK, the trailer that makes catering easier.

Configure Single axle - basic model


Single axle - universal option

The single-axle Humbaur catering box, the useful aid for your catering activities with universal option already mounted. The frame and chassis are made of hot-dip galvanized steel and give the HVK a long service life. The quality lighting of the HVK is protected in galvanized and powder-coated brackets. The floor of the HVK consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. In addition, a PVC coating is glued onto the wooden floor. Four cross braces are mounted on the frame that give the HVK stability on all subsurfaces. The wheel houses are integrated into the structure of the HVK. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium. By way of a step made of aluminium chequer plate, you enter the HVK via a lockable entrance door mounted in the front wall. Seals made of special plastic profiles are mounted on the door. The catering flap of the HVK is on the right side. It is easy to open as it has gas spring support. A hinged cover with rain protection strip also ensures that your customers are dry under the catering flap. The universal option consists of a sales counter with intermediate shelf, catering flap shelf incl. intermediate shelf over the flap and a fold-away bag shelf outside for your customers, all in ''wild pear' wood decor. A very extensive assortment of accessories ensures that you can tailor the HVK to your needs. The HVK, the trailer that makes catering easier.

Configure Single axle - universal option


Tandem Axle - basic model

The tandem Humbaur catering box, the useful aid for your catering activities. The frame and chassis are made of hot-dip galvanized steel and give the HVK a long service life. The quality lighting of the HVK is protected in galvanized and powder-coated brackets. The floor of the HVK consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. In addition, a PVC coating is glued onto the wooden floor. Four cross braces are mounted on the frame that give the HVK stability on all subsurfaces. The wheel houses are integrated into the structure of the HVK. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium. By way of a step made of aluminium chequer plate, you enter the HVK via a lockable entrance door mounted in the front wall. Seals made of special plastic profiles are mounted on the door. The catering flap of the HVK is on the right side. It is easy to open as it has gas spring support. A hinged cover with rain protection strip also ensures that your customers are dry under the catering flap. A very extensive assortment of accessories ensures that you can tailor the HVK to your needs. The HVK, the trailer that makes catering easier.

Configure Tandem Axle - basic model


Tandem Axle - universal option

The tandem Humbaur catering box, the useful aid for your catering activities with universal option already mounted. The frame and chassis are made of hot-dip galvanized steel and give the HVK a long service life. The quality lighting of the HVK is protected in galvanized and powder-coated brackets. The floor of the HVK consists of special multi-bonded wood so as to be waterproof. It has slip-resistant phenolic resin coating and is 18 mm thick. In addition, a PVC coating is glued onto the wooden floor. Four cross braces are mounted on the frame that give the HVK stability on all subsurfaces. The wheel houses are integrated into the structure of the HVK. The body of this box consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the sandwich box are made of anodised aluminium. By way of a step made of aluminium chequer plate, you enter the HVK via a lockable entrance door mounted in the front wall. Seals made of special plastic profiles are mounted on the door. The catering flap of the HVK is on the right side. It is easy to open as it has gas spring support. A hinged cover with rain protection strip also ensures that your customers are dry under the catering flap. The universal option consists of a sales counter with intermediate shelf, catering flap shelf incl. intermediate shelf over the flap and a fold-away bag shelf outside for your customers, all in ''wild pear' wood decor. A very extensive assortment of accessories ensures that you can tailor the HVK to your needs. The HVK, the trailer that makes catering easier.

Configure Tandem Axle - universal option