Tandem Axle

The freezer box for refrigerated transport of your goods below 0øC. The frame and the chassis are made of hot-dip galvanized steel and give the freezer box a long service life. The floor of the freezer box is 80 mm thick. It consists of a sandwich structure made of glass fibre reinforced plastic, spezial multi-bonded wood so as to be waterproof and a polyurethane rigid foam core. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the freezer box consists of 80 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. This structure is suitable for transporting food because of a PVC coating on the inside. The mountings of the freezer box are made of anodised aluminium and are constructed so that no cold bridges are present. The warp-resistant rear portal of the freezer box is made of stainless steel. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. The 85 mm-thick insulated rear doors can be opened separately from one another with lockable espagnolettes made of stainless steel. A wrap-around multiple door seal on the rear ensures that the cold remains in the vehicle. Our 150 VBN and 240 OBN units (depending on size) provide cooling in the freezer box with the following technical details: control range of cooling temperature +5øC to -18øC, permissible ambient temperature 0øC to +43øC, mains connection 230 V / 50 Hz I/N/PE, refrigerating capacity 545 or 1300 watts with a cold room temperature of -18øC and an ambient temperature of +32øC, power consumption 1080 or 1740 watts in cooling mode with an ambient temperature of +32øC, air flow volume of vaporiser 1000 or 1400 mü/h. In addition, the electrically programmed hot gas defrosting of our cooling unit is very user-friendly

TK 252915

Rear door (about 1525 x 2280 mm)
Total weight
2500 kg
Load capacity
1470 kg
Length (internal)
2925 mm
Width (internal)
1535 mm
Loading height
620 mm
Configure

TK 253415

Rear door (about 1525 x 2280 mm)
Total weight
2500 kg
Load capacity
1420 kg
Length (internal)
3435 mm
Width (internal)
1535 mm
Loading height
620 mm
Configure

TK 253916

Rear door (about 1675 x 2280 mm)
Total weight
2500 kg
Load capacity
1370 kg
Length (internal)
3945 mm
Width (internal)
1685 mm
Loading height
620 mm
Configure