Humbaur HTV AS

The practical livestock trailer

More space, less fuel consumption
i

Screwed longitudinal-beam chassis, hot-dip galvanized

i

Construction using high-quality 25 mm thick anodised aluminium platform gates

i

13-pin plug and reversing light

i

21 mm thick wooden base plate

i

High-mass surrounding frame section, hot-dip galvanised

i

Walk-up ramp with hydraulic spring supports and rubber granulate mat

i

2 binding rings

i

Entry door on the left hand side of vehicle

i

Handhold for moving

i
  • Standard jockey wheel
i

Tyre size suitable for 100km/h.

i

Cover and frame 350 mm, white colour, with window left and right

Use it over its many years of service life to transport your animals safely. This robustly built cattle trailer has an aluminium body with a slanting front. The body consists of double-walled aluminium profiles attached to a solid outer frame made from hot-galvanised steel plate. All edges have also been made from corrosion-resistant aluminium. A tough tarpaulin roof will protect your cattle against adverse weather conditions. The chassis with independent wheel suspension is equipped with maintenance -free spring axles.

The livestock tandem trailer HTV AS in detail:

Screwed longitudinal-beam chassis, hot-dip galvanized
Construction using high-quality 25 mm thick anodised aluminium platform gates
13-pin plug and reversing light
21 mm thick wooden base plate
High-mass surrounding frame section, hot-dip galvanised
Walk-up ramp with hydraulic spring supports
2 binding rings
Entry door on the left hand side of vehicle
Handhold for moving
Standard jockey wheel
Tyre size suitable for 100 km/h
Cover and frame 350 mm, white colour, with window left and right

Technical data

Tandem, Alu, slant front

Trailer Tandem, Alu, slant front in detail
Tandem, Alu, slant front silhouette sideview
Inner height 1.850 mm Total height 2.440 mm
Inner length 3.220 mm Total length 4.650 mm
Tandem, Alu, slant front silhouette backside
Inner width 1.700 mm Total width 2.200 mm

Tandem, Alu, slant front Standard equipment

  • Screwed longitudinal-beam chassis
  • Construction using high-quality 25 mm thick anodised aluminium platform gates
  • 13-pin plug and reversing light
  • 21 mm thick wooden base plate
  • High-mass surrounding frame section, hot-dip galvanised
  • Elegant galvanised rear tail support with integrated lighting
  • Walk-up ramp with hydraulic spring supports and rubber granulate mat
  • 2 binding rings
  • Entry door on the left hand side of vehicle
  • Handhold for moving
  • Jockey wheel
  • Tyres designed for 100 km/h
  • Cover and frame 350 mm, white colour, with window left and right

Tandem, Alu, slant front Models

Permissible gross weight in kg
2000
Load capacity in kg
1324
Body dimensions in mm (LxWxH)
4650 x 2200 x 2440
Internal dimensions in mm (LxWxH)
3220 x 1700 x 1850
braked
Load height in mm
470
Tyre size in inches
13

HTV 203217 AS

Permissible gross weight in kg
2000
braked
Body dimensions in mm (LxWxH)
4650 x 2200 x 2440
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
3220 x 1700 x 1850
Load capacity in kg
1324
Load height in mm
470
 
 

Images similar; some images show special equipment.