Senko 353016
* Our recommended retail price: Including VAT and vehicle documentation, transport costs on demand.
Technical data
- Trailer type
- Two axle
- Construction type
- Steely
- Weight
- 760
- Total weight
- 3.500
- Load capacity
- 2.740
- Inner length
- 3.000
- Total length
- 4.680
- Inner width
- 1.600
- Total width
- 2.230
- Inner height
- 270
- Total height
- 1.740
- Loading height
- 470
- Tyres
- 13 inch
Basic price
* Our recommended retail price: Including VAT and vehicle documentation, transport costs on demand. All specifications are approximate and refer to the production vehicle without optional extras. We assume no responsibility for errors or omissions. Illustrations similar; some illustrations show special equipment.
Standard equipment
- Welded drop-side-/frame construction made by steel plate, hot-dip galvanized
- Welded V-drawbar, hot-dip galvanized
- 13-pin plug and reversing light
- Hot-dip galvanised ramp wall with anti-slip grating, which is also gas spring supported (height approx. 1240 mm, tested on 2400 kg axle)
- Lashingrings mounted in external frame (5 pairs at 3000 mm / 6 pairs at 3750 mm internal length.), traction force 1000 kg per lashing ring
- Fully automatic support wheel
- Steel mudguard, opens and closes automatically during the lowering process
- Lighting mounted on the side
- Lowering hydraulics with hand pump
Description
This trailer can even be used to load vehicles with very little road clearance. Simply use the hydraulics to lower the loading platform either using a manual pump or - as an optional extra to make your work even easier - with the help of an electric motor. The lowerable rubber spring axles will provide you with an extremely shallow loading angle. The Senko is also enormously robust. The drop sides made from 3-mm steel plate are strong enough to handle even the heaviest loads. Each of the ten lashing rings has been DEKRA-approved for a tensile load of 800 kg. Naturally, all vehicle components have been hot-dip galvanised.