This trailer can even be used to load vehicles with very little road clearance. Simply use the hydraulics to lower the loading platform either using a manual pump or - as an optional extra to make your work even easier - with the help of an electric motor. The lowerable rubber spring axles will provide you with an extremely shallow loading angle. The Senko is also enormously robust. The drop sides made from 3-mm steel plate are strong enough to handle even the heaviest loads. Each of the ten lashing rings has been DEKRA-approved for a tensile load of 800 kg. Naturally, all vehicle components have been hot-dip galvanised.
It makes each operation as convenient as possible: Simply tilt the hydraulic bridge with a manual pump. Gas springs help you to operate the ramp wall. The low load height of 640 mm (single-axle model) or 650 mm (tandem-axle model) keeps the drive-up angle very low. This means that you can also load machines and cars having a low ground clearance without problems. So that the vehicles can be loaded onto the trailer without effort, a stable cable winch frame with a cable winch is available as an optional extra. The sophisticated chassis system of the MTK Allcomfort ensures particularly smooth road handling.