Thanks for your visit!

From 11th – 17th April 2016 the 31st world exhibition for construction machines, mining machines, building material machines, construction vehicles and construction equipments took place in Munich. We presented our trailers in the outdoor area north on around 600 square meters at stand FN 827/5 and 829/5. Thank you very much for your visit!

Our trailers at bauma

close

Tandem Wheels-In Trailer HBT BS from 10 t

If you are in rough off-road countryside and you need a construction machine transporter that offers unconven- tional transport facilities. You can drive your construction machinery up the folding laterally adjustable ramps onto our tandem flatbed HBT BS trailers. Its special chassis and floating balancing facility ensures safe loading and driving, even on bad roads.

Tandem Wheels-In Trailer HBT BS from 10 t

close

Tandem Wheels-In Trailer HBTZ BS from 19 t

Our HBTZ BS tandem flatbed trailers are designed for an exceptionally long service life as a result of its hot-dip galvanised chassis. Folding support legs provide safety during loading and unloading. Use the many fixtures for lashing your goods and drive with confidence and safety. Our wide range of accessories enables you to adapt your HBTZ accordingly!

Tandem Wheels-In Trailer HBTZ BS from 19 t

close

Tandem Three-Way Tipper HTK from 18 t

The largest and most economical of the three-way tippers has a conveniently low load height for its class and has 600 mm high drop sides giving a large load volume. The extra-wide tyres ensure low ground pressure and mean that you will get through, even on bad roads and tracks.

Tandem Three-Way Tipper HTK from 18 t

close

Tandem Three-Way Tipper HTK with 19 t

With a permissible gross weight of 19 tonnes, the HTK 19 is not only ideal for bulk materials such a earth, sand, gravel and concrete, but also construction materials such as bricks and concrete blocks. The design of the tandem three-way tipper is based on the width of a pallet and therefore guarantees the safe transportation of palletised goods. With optimised drive and tip qualities and a relatively low tare weight, the tipper offers a reliable helping hand for heavy-duty work.

Tandem Three-Way Tipper HTK with 19 t

close

Flatbed Turntable HTD 3-axle cranked

A traditional product – rugged, reliable, economical. The cranked cargo bed area serves as a stop for wheeled or tracked vehicles. The load rests against a stop and is easy to secure. Reduce the already low load height even more by lowering the air-suspension on the rear axle. Thus you can reduce the drive-up angle to just 10°.

Flatbed Turntable HTD 3-axle cranked

close

Flatbed Turntable HTD 4-axle cranked

Even the four-axle top model in the HTD range has a cranked cargo bed and has a lowering rear axle for particularly easy loading. Choose from three heights for the drawbar. On request you can get this model with a particularly durable hot-dip galvanised chassis. The hot-dip galvanised chassis provides optimum corrosion protection. An extensive selection of accessories makes the HTD suitable for any special requirement.

Flatbed Turntable HTD 4-axle cranked

close

5-axle turntable trailer HTD

This 5-axle turntable flatbed trailer is the ideal choice for transporting diggers, forestry machinery, construction machinery, road construction machinery and heavy equipment weighing up to 40 tonnes. Thanks to flat loading ramps and an ingenious system of load securing mechanisms, loading and unloading are completed quickly and easily. A wide range of individual fittings also guarantee a vehicle that is perfectly adjusted to the needs of its respective user. 

5-axle turntable trailer HTD

Advice?

Get some advice regarding our
heavy-duty trailers
Advice/Sales!
close

Three-axle semi-trailer HTS 30

The welded semi-trailer features an offset platform, inclined high-level platform and low tare weight. This makes it perfect for transporting diggers, earthmovers, construction machinery and heavy equipment. The flatbed trailer has an adjustable kingpin which makes it compatible with two-axle and three-axle tractor units. 

Three-axle semi-trailer HTS 30

close

Tandem Flatbed Trailer HS from 5 t

It is lightweight so that it can transport more heavy ma- chinery. We have protected it against corrosion so that it will last for a long time. Your construction machines can drive safely up the sturdy and durable ramps with a particularly flat drive-up angle onto the cargo bed. You can adapt the HS tandem flatbed trailer to different drawbar heights.

Tandem Flatbed Trailer HS from 5 t

close

Tandem Flatbed Trailer HS from 8.9 t

The big brother of the HS tandem flatbed trailer above 5 t allows for an even higher load capacity. Both trailers offer the same functionality. The standard lashing options integrated in the platform floor guarantee optimal load securing.

Tandem Flatbed Trailer HS from 8.9 t

close

Tandem Three-Way Tipper HTK from 5 t

The three-way tippers that deserve your trust: Their unique tipping platform withstands extremely high loads as well as point loads. The retracting support legs and the optional aluminium drive-up ramps, which can be stowed in a compartment integrated in the chassis, mean that the trailer can be deployed virtually unrestrict- edly in the construction industry

Tandem Three-Way Tipper HTK from 5 t

close

Tandem Three-Way Tipper HTK 13 L

The HTK with a gross weight above 10 t is a variable all-rounder. It is particularly impressive with its five-stage hard-chromed cylinder and hydraulic motorised three- way tipper. It has a sturdy, welded, hot-dip galvanised frame for optimum stability and safety. The platform floor is made from 4 mm fine-grained steel. The 500 mm high hinged drop sides with central lock can be folded down at the sides and rear and removed.

Tandem Three-Way Tipper HTK 13 L

News

Read our current reporting
on bauma here
To press info
close

MTK Allcomfort

It makes each operation as convenient as possible: Simply tilt the hydraulic bridge with a manual pump. Gas springs help you to operate the ramp wall. The low load height of 640 mm (single-axle model) or 650 mm (tandem-axle model) keeps the drive-up angle very low. This means that you can also load machines and cars having a low ground clearance without problems. So that the vehicles can be loaded onto the trailer without effort, a stable cable winch frame with a cable winch is available as an optional extra. The sophisticated chassis system of the MTK Allcomfort ensures particularly smooth road handling. 

Learn more about the MTK Allcomfort

MTK Allcomfort

close

3-way tipper Garant Alu

Our Garant sets quality standards in its class. Its components are completely hot-dip galvanised. The floor of the tipping bridge is made in a single piece. Drive-up ramps can be retrofitted and stored in the vehicle's plank compartment. This makes the Garant ideally suited for transporting of smaller items of construction machinery, for example. It is available with a single or double axle, as a backwards tipper or three-way tipper, always in outstanding quality. With its compact dimensions it gives particularly good service for landscaping and gardening and in the construction industry.

Learn more about the Garant Alu

3-way tipper
Garant Alu

close

3-Way tipper HTK Steel

Our HTK stands out as a result of their quality and a manual pump which can, on request, be replaced by an electric hydraulic pump. From 3 000 kg upwards, you get both the electrical and the manual pump. This allows simple and independent operation of your HTK in all applications

Learn more about the 3-way tipper HTK Steel

3-Way tipper HTK Steel

close

Rear tipper HUK

The HUK rear tippers are available as single axle or tandem-axle models. These trailers are characterised particularly by the galvanised bridge plate with outer frame V-groove and recessed tie-down rings. The tipping angle is 45 degrees. All of the models can be retrofitted with the electric pump and grid attachment and aluminium side wall panels.

Learn more about the rear tipper HUK

Rear tipper HUK

close

Single axle trailer HA with rear ramp

The clever box trailer with an intelligent lowering mechanism. The cargo bed moves towards you for loading and unloading. The flat drive-up angle is just 4 to 6 degrees. With the integrated access ramp and upwards opening tailgate, this trailer is the perfect partner for comfortable loading. A solid anti-slip floor and stable side walls with a GRP coating ensure durability. With the optional rocker, it is ideal for transporting motorcycles.

Learn more about the single axle trailer HA with rear ramp

Single axle trailer HA with rear ramp

close

Construction machinery transporter HS

Do you regularly have to transport lightweight or medium weight construction machinery or diggers? The sturdy and solid construction of the HS is designed for daily transport tasks. The low loading height facilitates loading. The mudguards with aluminium chequerplate that can be stood on, and the protected lighting units make it particularly durable in day-to-day operations.

Learn more abput the construction machinery transporter HS

Construction machinery transporter HS

close

Humbaur HKT

With the new Humbaur all-purpose trailer HKT, you can transport small vehicles securely and easily as never before. Every HKT-model is equipped as standard with a screwed and hot-dipped-galvanized chassis. By lowering the bed hydraulically, it is possible to load and unload your trailer very comfortably and easily thanks to the very low drive-up angle of 4ø up to 6ø - according to model. The new single-axle, lowerable HKT is characterized by the small ramp front edge, together with a slewing fastener for the plate. You can install a tarpaulin frame assembly fast and easily. So, the HKT is suited perfectly for every requirement und loading.

Learn more about the Humbaur HKT

Humbaur HKT

close

Rear tipper Loady

Compact dimensions, high-quality materials - the Loady always gives good service in daily use. Its particular quality characteristic: The sheet steel bridge is made of a single piece of hot-dip galvanised steel, just like its bigger brothers, the Garant and HTK. Where else would you find this in this class?

Learn more about the rear tipper Loady

Rear tipper Loady

close

Vehicle transporter Humbaur Universal

The hot-dip galvanised chassis and frame are topped by a continuous floor plate with almost universal transport options. You can load the Universal loader with two corrosion-protected drive-on planks. Shift the planks to adjust them exactly to the track width of the vehicle. Thereafter, simply slide the planks below the loading surface. You have seven lashing rings to fasten the load safely. You can at any time retrofit the trailer with an aluminium instead of a wooden floor, with aluminium sideboards or a tarpaulin with frame.

Learn more about the vehicle transporter Universal

Vehicle transporter Humbaur Universal

close

Tandem high loader HT

Everything that a professional needs: A stable high-loader with hot-dip galvanized frame and chassis. All important components like the longitudinal bar or the underrun guard are also protected from corrosion and are easily replaced, if there's a damage. At least six pieces of of tie-rings secure the load. Each of them contains a traction force up to 400 kg, approved by Dekra. The HT or the HN series offer a loading height from 700mm up to 725mm, or 610mm. Its double-walled aluminium drop sides look good and are robust.

Learn more about the tandem high-loader HT

Tandem high loader HT