Single axle

The single-axle Cool Trailer for refrigerated transport of your goods. The frame and chassis are made of hot-dip galvanized steel and give the Cool Trailer a long service life. Four telescoping crank supports with a special hot-dip galvanized bracket are attached directly to the frame as a standard feature with the Cool Trailer and thus provide for stability. The floor of the Cool Trailer is a stately 50 mm thick. It consists of two layers of special multi-bonded wood so as to be waterproof with slip-resistant phenolic resin coating and a thickness of 9 mm; there is a polyurethane rigid foam core in between with a thickness of 32 mm. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the Cool Trailer consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the Cool Trailer are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. Special cold room doors, to be opened separately from one another, with emergency opening from inside and wrap-around door seal provide additional safety. At the rear there is also a solid protective edge made of stainless steel for secure loading. Our HCU 1 unit provides cooling in the single-axle Cool Trailer with the following technical details: control range of cooling temperature +5øC to +15øC, permissible ambient temperature +12øC to +43øC, mains connection 230 V / 50 Hz I/N/PE, refrigerating capacity 1460 watts with a cold room temperature of +5øC and an ambient temperature of +32øC, power consumption 828 watts in cooling mode with an ambient temperature of +32øC, air flow volume of vaporiser 700 mü/h. In addition, the electrically programmed hot gas defrosting of our cooling unit is very user-friendly.

HGK 132513-19S50

With cooling unit HCU 1
Total weight
1300 kg
Load capacity
528 kg
Length (internal)
2510 mm
Width (internal)
1305 mm
Loading height
560 mm
Configure

Tandem Axle

The tandem-axle Cool Trailer for refrigerated transport of your goods with height-adjustable drawbar. The frame and chassis are made of hot-dip galvanized steel and give the Cool Trailer a long service life. Four telescoping crank supports with a special hot-dip galvanized bracket are attached directly to the frame as a standard feature with the Cool Trailer and thus provide for stability. The floor of the Cool Trailer is a stately 50 mm thick. It consists of two layers of special multi-bonded wood so as to be waterproof with slip-resistant phenolic resin coating and a thickness of 9 mm; there is a polyurethane rigid foam core in between with a thickness of 32 mm. This floor is thus optimally insulated and doesn't let the cold escape downward at all. The body of the Cool Trailer consists of 45 mm-thick sandwich panels with a polyurethane-foam core, which are covered by steel and a polyester lacquer on both sides. The mountings of the Cool Trailer are made of anodised aluminium, just like the warp-resistant rear portal and the rain gutter on the rear. A 250 mm-high abrasion protection made of aluminium chequer plate is attached to the inside walls. Special cold room doors, to be opened separately from one another, with emergency opening from inside and wrap-around door seal provide additional safety. At the rear there is also a solid protective edge made of stainless steel for secure loading. Our HCU 1 unit provides cooling in the single-axle Cool Trailer with the following technical details: control range of cooling temperature +5øC to +15øC, permissible ambient.

HGK 253017-19S50

With cooling unit HCU 1
Total weight
2500 kg
Load capacity
1488 kg
Length (internal)
3000 mm
Width (internal)
1755 mm
Loading height
560 mm
Configure

HGK 303017-19S50

With cooling unit HCU 1
Total weight
3000 kg
Load capacity
1960 kg
Length (internal)
3000 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure

HGK 253517-19S50

With cooling unit HCU 2
Total weight
2500 kg
Load capacity
1398 kg
Length (internal)
3510 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure

HGK 303517-19S50

With cooling unit HCU 2
Total weight
3000 kg
Load capacity
1876 kg
Length (internal)
3510 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure

HGK 254017-19S50

With cooling unit HCU 3
Total weight
2500 kg
Load capacity
1308 kg
Length (internal)
4015 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure

HGK 304017-19S50

With cooling unit HCU 3
Total weight
3000 kg
Load capacity
1792 kg
Length (internal)
4015 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure

HGK 354017-19S50

With cooling unit HCU 3
Total weight
3500 kg
Load capacity
2267 kg
Length (internal)
4015 mm
Width (internal)
1755 mm
Loading height
580 mm
Configure