From 13 t The HTK

HTK 14 t

Our three-way tipper in the medium weight class
i
  • Compressed air coupler heads (red/yellow)
  • Central tube with screw-in towing eye Ø 40 mm
  • galvanised and infinitely variable using a crank handle
i

Solid, welded and hot-dip galvanised frame for optimal stability and safety; platform floor made of 4 mm finegrained steel, swap-proof rocker-bearing bolts.

i

Laser-welded, high-quality steel sideboards, 500 mm height, can be folded down at the sides and rear, removable and hinged with central lock, bulkhead removable.

i

Hot-dip galvanised platform frame with longitudinal, transverse and diagonal struts for high stability and point-load resistance.

i

Drop sides primer-painted with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.

i

Motor-powered, hydraulic three-way tipping system, fivestep, hard-chromium-plated cylinder with stroke limiter.

i

Axles with drum brake, maintenance-free parabolic suspension with load compensation.

i
  • Pneumatic brake with release valve.
  • Compressed air coupler heads (red/yellow).
  • Anti-lock braking system.
  • EBS brake system with spring-loaded parking brake and 24-volt connection plug. The towing vehicle must be equipped with an ABS socket.
i

15-way connecting plug for lighting.

i

24 V lighting system with multiple-chamber tail lamps, optimally protected and LED side marking lamps.

i
  • 6 t lashing points recessed in the platform floor (2 pairs / 5.2 m; 3 pairs / 6.2 m).
  • 2 t lashing points in outside frame (6 pairs / 5.2 m; 7 pairs / 6.2 m).
i

Mudguard equipped with anti-spray system, rigid lateral impact protection.

i

2 wheel chocks with retainers 

i
  • Reinforced 12 t geared support jack with load and fast speeds, on the left in the direction of travel.

The 13.6 t permitted gross weight may allow you to transport the extra bit of load above 14 t that you need urgently. Particularly suitable for towing vehicles up to 7.49 t. Despite its high gross weight, you can use it with a 40 mm towing ring. These models primarily impress with their generously dimensioned chassis and tipping bridge frame and achieve the highest load-carrying capacity and durability.

Details of the HTK tandem three-way tipper from 14 t:

Galvanised central tube
Solid, welded, and hot-dip galvanised frame
Laser-welded, high-quality steel sideboards
Platform frame
Drop sides primer-painted
Motor-powered, hydraulic three-way tipping system
Axles and suspension
Pneumatic brake
15-way connecting plug
24 V lighting system with multiple-chamber tail lamps
Tie-down points
Mudguard
2 wheel chocks with retainers
Reinforced 12 t geared support jack

Technical data

HTK 145024

Permissible gross weight in kg 14400 Body dimensions in mm 7000 x 2550 x 1600
Load capacity in kg 10400 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 5030 x 2420 Tyre size in inches 285/70 R19,5
Load height in mm 1070    

HTK 145524

Permissible gross weight in kg 14400 Body dimensions in mm 7500 x 2550 x 1600
Load capacity in kg 10250 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 5530 x 2420 Tyre size in inches 285/70 R19,5
Load height in mm 1070    

HTK 135024 L

Permissible gross weight in kg 13000 Body dimensions in mm 7000 x 2550 x 1500
Load capacity in kg 9700 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 5030 x 2420 Tyre size in inches 245/70 R17,5
Load height in mm 990    

Subject to technical modifications. All specifications are approximate values and relate to a series vehicle without accessories. Additional equipment will change both the empty weight and the load capacity!

What can I transport with the Humbaur HTK trailer?

Construction materials

Construction materials and pallet goods up to 10.2 t.

Concrete pipes

The HBTZ can also be loaded with particularly unwieldy and heavy construction materials such as concrete pipes.

Crawler excavator

Mini-excavators and compact excavators up to a weight of approx. 9.5 to 9.8 tonnes, depending on the model.