From 5 t The HTK

HTK 5 t

A three-way tipper that deserves your trust
i

Central tube with screw-in towing eye Ø 40 mm, galvanised and infinitely variable using a crank handle.

i

Solid, welded and hot-dip galvanised frame for optimal stability and safety; platform floor made of 4 mm finegrained steel, swap-proof rocker-bearing bolts.

i

Laser-welded, high-quality steel sideboards, 500 mm height, can be folded down at the sides and rear, removable and hinged with central lock, bulkhead removable.

i

Hot-dip galvanised platform frame with longitudinal, transverse and diagonal struts for high stability and point-load resistance.

i

Drop sides primer-painted with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.

i

Motor-powered, hydraulic three-way tipping system, fivestep, hard-chromium-plated cylinder with stroke limiter.

i

Axles with drum brake, maintenance-free parabolic suspension for optimal load compensation.

i
  • Pneumatic brake with release valve.
  • Compressed air coupler heads (red/yellow).
  • Anti-lock braking system.
  • EBS brake system with spring-loaded parking brake and 24-volt connection plug. The towing vehicle must be equipped with an ABS socket.
i

15-way connecting plug

i

24 V lighting system with multiple-chamber tail lamps, optimally protected and LED side marking lamps.

i
  • 6 t lashing points recessed in the platform floor (2 pairs / 5.2 m; 3 pairs / 6.2 m).
  • 2 t lashing points in outside frame (6 pairs / 5.2 m; 7 pairs / 6.2 m).
i

Mudguard equipped with anti-spray system, rigid lateral impact protection.

i

2 wheel chocks with retainers 

i
  • Reinforced 12 t geared support jack with load and fast speeds, on the left in the direction of travel.

The HTK with a gross weight above 10 t is a variable all-rounder. It is particularly impressive with its five-stage hard-chromed cylinder and hydraulic motorised threeway tipper. It has a sturdy, welded, hot-dip galvanised frame for optimum stability and safety. The platform floor is made from 4 mm fine-grained steel. The 500 mm high hinged drop sides with central lock can be folded down at the sides and rear and removed.

Tandem three-way tipper HTK from 10 t:

Galvanised central tube
Solid, welded, and hot-dip galvanised frame
Laser-welded, high-quality steel sideboards
Platform frame
Drop sides primer-painted
Motor-powered, hydraulic three-way tipping system
Axles and suspension
Pneumatic brake
15-way connecting plug
24 V lighting system with multiple-chamber tail lamps
Tie-down points
Mudguard
2 wheel chocks with retainers
Reinforced 12 t geared support jack

Technical data

HTK 504020

Permissible gross weight in kg 5000 Body dimensions in mm 6040 x 2200 x 1400
Load capacity in kg 3250 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 4000 x 2030 x 400 Tyre size in inches 215 R14 C
Load height in mm 920

HTK 654020

Permissible gross weight in kg 6500 Body dimensions in mm 6040 x 2200 x 1400
Load capacity in kg 4700 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 4000 x 2030 x 400 Tyre size in inches 215/75 R17,5
Load height in mm 950

HTK 754020

Permissible gross weight in kg 7500 Body dimensions in mm 6040 x 2200 x 1400
Load capacity in kg 5600 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 4000 x 2030 x 400 Tyre size in inches 215/75 R17,5
Load height in mm 920

HTK 105524

Permissible gross weight in kg 10500 Body dimensions in mm 7460 x 2550 x 1475
Load capacity in kg 7100 Tilt angle (to side/rear) 43 °/41 °
Internal dimensions in mm 5535 x 2420 Tyre size in inches 235/75 R17,5
Load height in mm 990

HTK 105024

Permissible gross weight in kg 10500 Body dimensions in mm 6990 x 2550 x 1475
Load capacity in kg 7150 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 5035 x 2420 Tyre size in inches 235/75 R17,5
Load height in mm 990

HTK 104522

Permissible gross weight in kg 10500 Body dimensions in mm 6460 x 2350 x 1475
Load capacity in kg 7500 Tilt angle (to side/rear) 45 °/48 °
Internal dimensions in mm 4520 x 2220 Tyre size in inches 235/75 R17,5
Load height in mm 990

Subject to technical modifications. All dimensions are approximate values and relate to the series vehicle without accessories. Additional equipment changes both the inherent weight and the load capacity! With a gross weight of 5 tonnes, the HTK possesses features similar to those found in other models with a gross weight exceeding 10 tonnes.

What can I transport with the Humbaur HTK trailer?

Construction materials

[Translate to English:] Baumaterialien-Symbolbild Ziegelsteine

Construction materials such as bricks, concrete blocks, gravel and building rubble.

Crawler excavator

[Translate to English:] Kompaktbagger/Minibagger

Mini-excavators and compact excavators up to a weight of approx. 3.2 to 7.6 tonnes, depending on the model.